Practical guides · Practical guide

Planning in-house CSV training that staff can apply to their own work

Staff understood the URS, risk assessment and test evidence during training. In the next project, responsibility for decisions is still unclear. Set learning objectives from the work people actually perform. Their experience and intended outcomes determine whether in-house training, a GAMP workshop or supported work on a live project fits best.

Table of contents

At a glance

What makes in-house CSV training effective?

Plan in-house CSV training around participants’ tasks and current knowledge. Use learning objectives to select content, exercises and feedback. Internal procedures and realistic system cases help assess application. A GAMP workshop can teach methods, while assessment of your regulatory scope and practical experience remain necessary. Coaching may suit a team that needs guided application to its own case.

  • Training provides fundamentals, workshop develops decisions, coaching supports implementation.
  • QA, IT, and Project Leadership within the department require different focus areas at times.
  • A participation certificate does not establish general competence for any validation task.
  • Practices and subsequent application should be linked to the own quality procedure.

What should employees be able to do better after training?

Capture what employees should do better after training. A system owner may need to classify a change, a tester is expected to define expected results, and a reviewer should identify inappropriate evidence. A general objective of "understanding CSV" does not make these differences visible.

Review existing experience and typical uncertainties. Personnel with technical expertise do not necessarily require the same onboarding approach as new team members. For mixed groups, common foundational training combined with separate hands-on exercises can be effective. Crucially, the subsequent work assignment and learning objectives must align.

Sources: [1]

Training, Workshop, or Coaching?

Training establishes a shared knowledge base. A workshop addresses a specific topic collaboratively, for example, the requirements for a limited process. Coaching supports individual progress and provides targeted feedback. The formats can be combined, but should not be offered as interchangeable daily packages.

When a team is conducting tests for the first time, a foundational orientation followed by hands-on practice may be more appropriate than an open process discussion. If experienced personnel become stuck on specific decisions, guided application can deliver greater value than a repeated general introduction. Select the format based on the remaining knowledge gap.

Develop a role-appropriate training program

Derate learning objectives from the tasks assigned to your participants. Depending on their prior knowledge, alternative exercises or formats may be more appropriate; the overview is not a prescribed curriculum with a fixed minimum number of teaching hours.

Let participants explain how they arrived at their result. A correct answer in a multiple-choice test does not necessarily indicate that someone can independently make the same decision within a project.

Develop a role-appropriate training program
RolePotential learning objectiveAppropriate format as an exampleAppropriate exercise
Business process team Clearly describe the intended use Workshop Distinguish a specific requirement from a solution idea
IT Technical change and process impact are interlinked Case workshop Explain the dependencies of an update in a traceable manner
Tester Expected and actual results differ Training with hands-on practice Create a test case with reference and result.
Reviewer Assess the validity of a testing result evidence Coaching Gaps in an anonymized test sample justify
System owner Operate and manage changes to the organization Coaching in one's own case Handle a change trigger with defined responsibilities
Project Leadership Plan involvement and decision-making requirements Workshop Develop a results plan with professional dependencies.

Sources: [1] [2]

Further reading:

Properly interpret GAMP 5 as a professional reference guide

GAMP 5 is an ISPE guideline for a risk-based approach to computerized systems. It is not a standalone legal requirement and does not constitute a general certificate for an organization. A workshop should distinguish between statements derived from an applicable regulatory framework and those originating from a professional methodology.

The public ISPE description in the second edition mentions, among other things, supplier integration, iterative development, tools and automation, as well as critical thinking. The table outlines corresponding workshop modules that do not require copying licensed original content.

These modules represent an independent didactic proposal and are not a complete GAMP training program. Existing specialist articles on GAMP 5, categories, and agile validation complement the in-depth coverage.

Ensure that categories and document terminology are not used for their own sake. A team must be able to justify which risks and requirements necessitate validation evidence. Those who merely memorize a template sequence can only assess deviations from the original project context with limited accuracy. Proprietary original materials must be used in accordance with their respective usage rights.

Properly interpret GAMP 5 as a professional reference guide
ModuleOwn exerciseReusable learning outcome
Use supplier invoices Assess a sample document set against own requirements Distinguishing suitable supporting documents and remaining questions
Work iteratively Trace a changed requirement through design, testing and review Maintain traceability of evidence despite changes in processing.
Assess tools Purpose, controls, and required evaluation for a test tool Explain the true value and limitations of automation
Make critical decisions Two justifiable test approaches for comparing error consequences The selected test depth is professionally representative

Sources: [3] [2] [4]

Further reading:

Prepare appropriate cases and documentation in advance

A case from your organization enhances relevance to daily work, requires only a limited task and appropriate information. For example, select an Excel calculation or a plausible change justification. Remove or replace confidential content, if not necessary for the learning objective.

Clarify whether the exercise is a learning simulation or contributes to a real project. A workshop draft has no automatic status as approved validation evidence. Any planned reuse requires assessment through the applicable company procedures.

Sources: [5] [2]

Exercise example: Evaluate a audit trail entry

Assuming the training uses a specially prepared dataset and the prescribed change documentation for this process, a review result has been altered. Participants are to identify the original and revised values, the responsible individual, the timestamp, and the required justification. Subsequently, they are to determine whether the submitted entry adequately clarifies the specific change or identify which information is missing.

New employees are initially assigned a guided task with defined search steps. Experienced employees can independently assess an additional case and explain the boundaries of their conclusions. Learning outcome is the demonstrated completion of a defined task; subsequent effectiveness in operational settings will be evaluated separately. The example does not assert a general audit trail requirement for every individual record.

Sources: [2] [1]

Evaluate learning outcomes and subsequent efficacy separately

A closing exercise can demonstrate understanding of the training day content. Whether the application succeeds later in routine operations remains an open question. Chapter 2, Section 2.11 mandates periodic evaluation of the practical effectiveness of ongoing training. The specific method should align with the scope of the training activity.

For example, arrange for appropriate feedback on a case that will be processed later. This can reveal whether additional guidance or experience is required. A general satisfaction rating of the seminar serves only as a limited indicator. A well-rated presentation and effective training are not automatically equivalent.

Sources: [1]

Further reading:

What else besides the training date belongs to the order

A viable proposal includes target groups, learning objectives, pre-work, exercises, and planned evaluation. Clarify adaptations to your processes, participant numbers, and required engagement. If coaching follows, the case selection, available time, and expected feedback should be specified.

At conclusion, your team should have clear documentation and the results of the exercises. Open technical questions should be visible and assigned to a next action step. Evaluate the value derived, specifically in terms of which concrete tasks have become more understandable. A large presentation library alone is not sufficient as a quality indicator.

  • Derate learning objectives from actual tasks.
  • Integrate format and prior knowledge.
  • Combine in-house procedures with appropriate training scenarios.
  • Distinguish a training exercise from project evidence that requires approval.
  • Evaluate subsequent application and further need for support.

Sources: [1] [6]

Further reading:

Project experience and collaboration

Build in-house CSV training around the decisions your staff will make

Which decisions should participants be able to make independently afterwards? We select content and exercises around those decisions, using your procedures or suitable anonymised examples where possible. A new team needs a different starting point from experienced reviewers working on difficult cases. If a seminar alone is insufficient, guided work on your project can help staff apply the method.

Frequent Questions about CSV In-House Training

What is the difference between CSV training and coaching?

A training session delivers planned content and foundational knowledge. Coaching supports the individual in addressing specific tasks and provides feedback. Both formats can effectively complement each other. The appropriate selection depends on prior knowledge, the task at hand, and remaining uncertainties.

Is a GAMP 5 workshop a certification of our company?

No. GAMP 5 is a technical guidance document. A workshop can facilitate the understanding of its application, but it does not automatically validate the suitability of your processes or systems. Evaluate the course based on learning objectives and actual implementation.

Sources: [3]

Does a participation certificate suffice as evidence of competence?

It initially documents the extent of participation as described. For a specific task, knowledge, practical experience, and potentially additional assessment are relevant. Suitability should not be inferred solely from the presence of a certificate.

Sources: [1]

Can QA and IT be trained jointly?

Yes, common foundations and case-based work can improve alignment. Different responsibilities may require additional role-specific training exercises. Clarify in advance what all parties understand collectively and what individual roles are intended to apply.

Can we create our validation documents during the workshop?

A training exercise can produce useful drafts when the case and scope fit. To reuse them, put them through your own review and approval procedure. A training output is not automatically a completed project record.

Sources: [5]

How do we assess the benefit following the review date?

Assess, at a later applicable task, whether participants can apply learned content in a comprehensible and practical manner. Provide feedback on remaining uncertainties. A mere satisfaction score only provides a limited indication of practical effectiveness.

Sources: [1]

Sources and review date

Primary source date: 17 October 2026. Chapter 2 provides reference to task-appropriate training and practical effectiveness assessment. GAMP 5 is treated as a guide based on the public ISPE classification; a complete reproduction of licensed content is not claimed. The learning matrix and audit trail example are standalone didactic aids. EU-GMP statements relate to human medicinal products (EudraLex Volume 4).

  1. European Commission: EU GMP Chapter 2, Personnel, effective from 16.02.2014Personal, role-specific training and assessment of practical effectiveness; official EudraLex entry with original chapter.
  2. European Commission: EU GMP Annex 11, Computerised Systems, January 2011 revisionHuman medicinal products – GMP; in particular, §§1–4, 7, 10–13, 16–17; specific application for each section.
  3. ISPE: GAMP 5, Second Edition – Public Description of the GuidelinePublic publication description; no claimed full-text access to the paid guide.
  4. ICH Q9(R1): Quality Risk Management, official text from the European CommissionRisk-driven decisions, appropriate formalities, and handling of subjectivity; own matrices are implementation proposals.
  5. European Commission: EU GMP Chapter 4, Documentation, January 2011 revisionControlled documentation and records; official EudraLex entry with original chapter.
  6. European Commission: EU GMP Chapter 7, Outsourced ActivitiesOutsourced GMP-related activities, suitability, responsibilities, agreements, and monitoring.

Sources checked: .

Daniel Herrmann, Daniel Herrmann Consulting

Daniel Herrmann Consulting

Identify the next independent task to be completed.

Bring the target audience, prior knowledge, and a specific task to mind. From this, a learning objective can be planned, with its content, exercises, and subsequent application aligning seamlessly.

  • Computer system validation →

    Bring your GxP systems into validated operation, from laboratory software, MES and eQMS to ERP. We define the scope, plan risk-based tests using GAMP 5 and hand the evidence to QA for release.

Send a project enquiry Customer testimonials →