Table of contents
At a glance
Can open-source software be used in GxP processes?
Open-source status alone establishes neither unsuitability nor trustworthiness. Assess the intended use, risks, traceable development or evaluation, and a workable operating model. Check specific versions, dependencies, maintenance and business functions. Public source code does not demonstrate that your configured application fulfils its intended purpose.
- Assess the intended use and effects of individual components, rather than concluding GxP suitability from the licensed form alone.
- Determine versions, relevant dependencies and reference cases in such a way that the tested processing remains recoverable.
- Assessment of errors, safety reports, and updates assigned to a responsible party.
Scope and Applicability
This article addresses the methodological approach to open source. Intellectual property rights and individual security authorizations require separate evaluation. GAMP is a industry guidance document; the regulatory framework depends on the specific area of use.
Verify versions and actual processing activities
Maintain traceability for used versions and relevant dependencies. A minor library update can alter data processing, even if the user interface remains unchanged. Therefore, impact assessment must be capable of being initiated below the visible product name.
Verify actual processing. Access to source code can support audits but is not equivalent to a reviewed installation, configuration, and usage. Technical edge cases, error handling, and access pathways remain relevant.
Separate licensing model from GxP suitability
Open source describes the provision and use of source code under a license. This does not imply automatic GxP suitability nor inherent unsuitability. Evaluate the intended use, actual functionality, configuration, and associated risks. The availability of open-source source code does not confirm that your specific application functions correctly or is appropriately operated.
GAMP is a risk-based guidance document, not a regulatory software approval. A general category solely based on licensing form would be imprecise. Classification should consider the actual software and its usage. This article does not derive a binding GAMP classification for each open-source project.
Distinguish between library, development tool, and full application. A library may be part of a critical calculation pathway. A development tool can influence the generated audit trail. An application may actively manage data. The system boundary follows this functional behavior, not solely the installation location or a known project name.
Create a component file with responsibility and dependencies
Capture version, origin, license, intended use, and responsible operator. Include direct and relevant indirect dependencies. An unaltered primary application may behave differently due to updated libraries. A package name without version specification is therefore weak for reproducibility.
Review available evidence: documentation, testing, change records, known defects, and support. Quality can vary significantly across projects. A large community indicates activity but does not substitute for evaluation of required functionality. Missing documentation remains visible as a gap.
| Area | Question to investigate | Suitable evidence |
|---|---|---|
| Origin | Where does the used stand originate? | Designated release and reference pathway |
| Function | Which GxP task is affected? | Application Description and Requirements |
| Dependency | Which additional components are involved? | Compliant Version and Component Overview |
| Maintenance | Who evaluates errors and updates? | Named responsibility and procedures |
| Suitability | Which function is actually being verified? | Risk-driven own evidence |
Example: Library update modifies a data export
An internal tool exports data to an archive file. After updating a library, date formats are altered. The primary application remains unchanged, and the export function works technically. A subsequent import, however, incorrectly interprets day and month. The license type of the tool does not explain this error.
Prepare known values with unambiguous and ambiguous date specifications. Compare export and intended re-use before and after the update. Document versions and relevant settings. A file comparison can assist; the professional interpretation in the target system remains to be independently assessed.
Upon identification of an issue, the root cause is determined and the affected time period is assessed. The correction may consist of an explicit formatting rule or another appropriate approach. Relevant reference cases should be repeated. Resetting the library without evaluation of previously generated files does not address historical data concerns.
| Test case | Input or action | Expected finding |
|---|---|---|
| Unique date | Export the specified day | Correct meaning in the target |
| Ambiguous format | Use a day and a month both below twelve | No silent exchange |
| Special characters | Export relevant text | Content and coding remain appropriate |
| Missing specification | Use an empty value | Defined treatment instead of invented information |
| Comparison of updates | Reprocess reference inventory | Relevant behavior change identified |
Appropriately leverage available supplier evidence
Even without a traditional manufacturing supply agreement, appropriate information may be available. Assess which statement is actually supported by documented tests or release instructions. An automated project test status may cover certain functionalities, but it cannot verify your configuration or data. The internal evaluation must explicitly define this boundary.
When a commercial service provider takes over operations or provides support, consider their specific services in addition. Open source and professional support are not mutually exclusive. Responsibility, security alerts, and change procedures should be clearly defined. However, a support agreement does not automatically replace the evaluation of in-house usage suitability.
Avoid ungrounded security assumptions in either direction. Visible code is not automatically verified; closed source is not automatically safer. Assess actual maintenance, known risks, and your capacity for response. The decision must be based on concrete evidence rather than a blanket licensing judgment.
Control installation, modification, and restoration
Obtain a reproducible installation state. This may include package versions, configuration, and required dependencies. An installation command that continuously loads the latest available version hinders future reconstruction. The appropriate technical approach depends on architecture and intended use.
Evaluate updates based on their functionality and potential impacts. A security patch may be urgent but requires appropriate validation and a controlled transition. A long-standing, frozen version is not an automatic quality strategy. Operations integrate risk assessment, change management, and monitoring.
Verify restoration using known reference cases. A successfully installed service does not prove that calculation, data format, or interface functions correctly upon restoration. Evidence should confirm the functions most critical to the intended use. Define limitations when certain components cannot be practically validated.
Justify approval for use and hand over to operations
The decision should integrate required functionality, available evidence, internal assessments, remaining risks, and operational responsibility. The absence of a certificate is not automatically a disqualifying factor; however, the lack of appropriate supporting documentation must be addressed. The rationale should enable a subsequent reviewer to understand why the solution is appropriate for limited use.
Provide version status, reference tests, and change management procedures. An internal responsible party should know which component provides the critical function and where information on changes is located. This ensures that operations are not solely dependent on the developer who originally implemented the tool.
Draft: Evaluate an open-source component for its specific intended use
The table transfers the export example to a fillable component evaluation. For your own case, enter which function should be secured, which stand belongs to it and who takes over the operation.
| Evaluation field | Example entry | Assessment question |
|---|---|---|
| Purpose | Generate date fields for archive export. | Which professional judgment is affected? |
| Status | Designated release and relevant libraries. | Is the combination retrievable? |
| Rule | Unambiguously documented date format. | Are day and month preserved in the target? |
| -reference | Ambiguous and unambiguous known data. | Does the test identify relevant formatting errors? |
| Maintenance | The responsible party evaluates errors and updates. | No unclear unmonitored change? |
| Boundary | The evidence applies to the stated purpose of the export. | No flat-rate GxP approval claims? |
Next steps
- Define intended use and critical data processing.
- Capture origin, versions, and relevant dependencies.
- Assign maintenance, safety evaluation, and change management pathway.
- Demonstrate suitability and error handling for the specific process.
Project experience and collaboration
Maintain control of the critical component across updates
With developers and process owners, we trace an open-source component to its actual effect on a calculation or data export. We identify provenance, versions, relevant dependencies and available evidence. If a provider supports the version in use, its services must meet the need. With internal maintenance, your team needs a workable process for defects, security notices and updates. We test the solution against its critical functions. An open licence alone does not establish suitability.
Frequently asked questions about Open-source software in GxP operations
Is open source automatically individually developed software?
No. The GAMP classification depends on the actual software, its customization, and the intended use. An open-source license does not automatically classify a standard library as a custom-developed application. Document which components and internal modifications influence the GxP-related processing.
Must every source code be fully reviewed?
No. The required audit depth shall be determined by the intended use, functions, and associated risks. For a critical calculation, a targeted code review may be appropriate; for a supporting library, other forms of evidence may adequately address the relevant question. Justify the selection and verify that version reference and functional testing actually cover the specific needs.
Can we use open source software without a traditional manufacturing agreement?
Yes, if responsibilities for support and operational oversight are feasible and clearly defined. Specify who evaluates errors and updates, tracks safety alerts, and provides support for the deployed version. This can be handled by your own team or an external service provider. The mere existence of a community does not constitute assurance.
Can we fully take over the Community tests?
Appropriate tests can provide evidence. Assess current status, scope, prerequisites, and transferability. They do not automatically cover your configuration, data, and processes. Supplement with additional validation evidence for remaining risks. A green project status does not constitute general proof of GxP suitability for your specific intended use.
Do we need a component overview for open source?
A clear overview helps in understanding actual versions and dependencies. The scope is determined by usage and risk profiles. A generic, comprehensive list without technical context may become unwieldy; the absence of critical dependencies hampers reproducibility and change evaluation. Identify the components relevant to the statement.
Is a frozen version the most reliable long-term solution?
Not automatically. It can support reproducibility, but known defects or safety risks may persist. Maintenance and changes must be evaluated systematically. An update requires appropriate validation; inaction also demands a thorough risk assessment. The decision shall be based on the specific operational context and required functionality.
Sources and review date
The sources provide the technical foundation. Tables, checklists, and examples are derived methodological tools, not verbatim regulatory requirements. Manufacturer information must be referenced to the specific version and configuration in use.
- European Commission: EU GMP Annex 11, Computerised Systems (2011)Current version as per EudraLex inventory as of 14.10.2026. Application, risks, operation, and data lifecycle; specific testing proposals are derived independently.
- ISPE: GAMP 5, Second Edition (2022) – official description of the guidelineRisk-based guidance document; no official software approval. Detailed internal evaluation proposals are not literal GAMP requirements.
Sources checked: .
From an open point to a traceable approach.
We support you in assessing the current situation, clarifying responsibilities, and implementing appropriate evidence within operations. The type of support that is most effective depends on your system, your team, and the specific objective.
- Computer system validation →
Bring your GxP systems into validated operation, from laboratory software, MES and eQMS to ERP. We define the scope, plan risk-based tests using GAMP 5 and hand the evidence to QA for release.

