Before uploading a migration file, decide which data the target needs and where the remaining history will be available. A missing target field could be intentionally archived information or an unintended gap. The two require different decisions.
How do you test a data migration into SAP Business ByDesign?
Populate SAP Business ByDesign migration templates with source data, upload and validate them in the migration tool, convert source values to permitted target values and import the data. Load dependent objects in the correct order. Link those steps to approved mappings, data relationships and use in the target process. A successful tool step does not replace the organisation’s assessment of its GxP data.
Scope and Applicability
The article concerns initial or supplementary migration into ByDesign. Ongoing interfaces and cloud updates have different test boundaries. Establish the actual objects in scope before assuming one migration template can import every historical object.
Begin with the future use of the data. Which material batches, identified stocks, open activities, and references are required in ByDesign? Which historical records can remain accessible via an appropriate archiving pathway? Separate active transfer from retention. A technical table export does not yet reflect the professional assessment.
The SAP ByDesign help document from February 2026 describes migration templates, file upload with validation, source-to-target value conversion, and import. Certain objects are interdependent and must be loaded in a predefined sequence. Assign your review activities to the following steps: file validation, alignment with the approved mapping, and assessment of the technical impact following import. For requirements deviating from standard templates, SAP specifically identifies the need for dedicated customized templates. Clarify available objects and gaps in support prior to decommissioning the source system.
Capture the dependencies between objects. A stock can require an item, a unit, a warehouse reference, and an identified stock quantity. When identifiers are changed, the reconciliation must maintain a traceable assignment. The selected loading sequence should take these relationships into account and be verified during a pilot run.
The Mapping Document as the Professional Basis for Decision-Making
For critical fields, document source, target, significance, transformation, and verification method. A technical field mapping alone is insufficient when the status in the target field has a different impact. Therefore, specify the action derived from the target value and how its correct impact is verified.
When duplicate identifiers are merged or invalid units are corrected, the inventory changes consciously. Such changes need a comprehensible reason and a connection to the source. Uncontrolled manual corrections between export and import can make it difficult to investigate differences later.
Internal Work Aid: The Mapping Document as Business decision Basis
Data area
Critical content
Own reconciliation
Material master
Identification, unit, and relevant parameters
Field comparison with approved mapping
Identified stock
Product reference, batch number and date information
Unique assignment and professional application
Inventory
Quantity, location, and acceptable status
Quantity comparison plus selected process validation
Open process
Processing status and associated objects
Controlled continuation in target
Historical Context
Previous identification and associated documentation
Example and inspection table: status meaning following takeover
A batch C-44 is transferred from the legacy system. In the legacy system, status S indicates that material is locked for a specified production use. In the target system, a seemingly equivalent status is assigned. Only a process test demonstrates whether this assignment actually restricts the intended use. An identical status name is insufficient.
Prepare two comparable stocks with released and locked starting conditions. Compare identifier, product reference, quantity, and target status. Then perform the intended authorized or unauthorized business process flow. The expected behavior shall be defined as a separate process requirement; it does not constitute a general statement regarding the behavior of any ByDesign configuration.
If the intended blocking effect fails, distinguish between mapping errors and inappropriate target controls. A correctly loaded status may be technically accurate but may still have the wrong functional effect. Correction may therefore require a different configuration or an additional, justified control pathway. Repeat the relevant data and process reviews following adjustments.
The batch record integrates individual object inspections with the final status. Document the data actively transferred and ensure that required history remains accessible. All open activities and changes following the general inspection must be explicitly linked to this status.
Own work aid: Transfer of object until authorized use
Case
Assessment question
Expected evidence
Released stock
Is the defined intended use feasible?
Correct batch assignment and a permitted workflow
Blocked stock
Does the selected usage limitation apply?
Invalid subsequent step is prevented or appropriately controlled
Missing reference
Is an incomplete object reference detected?
No unexplained technical data record
Repeated transfer
Do duplicate or overlapping objects arise?
Planned retry remains traceable
Historical Investigation
Can C-44 be traced back to the source process?
Assignment of identifiers and required context available
Finales Delta
Is the subsequent status change included?
The reconciliation reflects the final version actually loaded
A pilot run should be conducted using a known source inventory and a clearly defined tool configuration. Document the import scope, errors, warnings, and technical discrepancies. Assess whether the dataset is representative enough to support critical transformations. Rare edge cases must not be excluded solely due to low frequency if their potential impact is significant.
Between the pilot run and final acceptance, new batches and status changes may occur. Define a leading source timestamp and establish a process for handling subsequent modifications. A delta comparison should identify the actually modified objects. Simply reusing a previously successful import package does not confirm the final data state.
Plan a controlled shutdown. Who decides on unresolved discrepancies? Which functionalities remain locked? When can the legacy system still operate usefully? A rollback also affects processes established since the transition. The answers must align with the specific project and be available prior to productive cutover.
A release file combines technical run, professional comparisons, evaluated differences and permitted use. Name excluded data and their access path. A statement such as "Migration complete" should refer to a clearly defined scope. Otherwise, it remains open whether historical change information, attachments or open processes were considered at all.
For storage, a readable export is not automatically sufficient. Verify that the required meaning and context are preserved. If a historical decision can only be justified in conjunction with a method version or an earlier status, that context must remain appropriately accessible. The specific solution may vary depending on the data type.
Provide mapping, attribute assignments, reconciliation reports, and remaining operational tasks. The internal team should be able to trace any subsequently reported discrepancy back to the adopted status. Only in this way can it be determined whether a deviation arises from migration, configuration, or a subsequent change.
Check mapped values against the subsequent business transaction
Your data owners select a known batch or another critical business object. We compare its source values, approved mapping and migrated target values against the intended use. A standard template may support the technical transfer. If it excludes required objects, we agree how to retain the necessary data before access to the source ends. We include the final change made after the dress rehearsal. A successful Validate step alone does not establish that the migrated data are correct for business use.
Frequently asked questions about ByDesign data migration
Can "Validate" and a successful import be sufficient for GxP compliance proof?+
No. Tool validation and successful technical import are only components. Compare the approved mapping, critical contents, relationships, and subsequent usage in the target environment. A technically accepted status may lead to incorrect outcomes in a functional context. Deliberate exclusions and required history must also be properly justified.
How do we handle inactive data that is not actively transferred by ByDesign?+
Assess the required usage, significance, and retention period. An appropriate archiving or access solution can preserve the necessary context outside the operational system. Document and verify this approach prior to the withdrawal of source access. An unexecutable import does not imply an automatic reduction in retention obligations.
How do we handle a new source change after the general test?+
Capture the final source state and verify the planned delta takeover. A previous successful general sample does not validate a subsequent change. Particularly, status, open activities, and relationships may be affected. The final reconciliation must explain the actual last takeover and its authorized usage.
Can the technical loading sequence be technically relevant?+
Yes, if objects are interdependent or target rules are applied during transfer. Verify the actually planned sequence in a suitable pilot run. A test environment with existing references may mask missing dependencies. Identify preconditions and assess the final target state.
Sources and review date
The sources provide the technical foundation. Tables, checklists, and examples are derived methodological tools, not verbatim regulatory requirements. Manufacturer information must be referenced to the specific version and configuration in use.
SAP: Business ByDesign Data MigrationSAP Business ByDesign, February 2026: Migration templates, validation, value realization, import, and dependencies. Tool validation must be distinguished from internal subject-matter data review.
Sources checked: .
Daniel Herrmann Consulting
Ensure professional assurance of the ByDesign migration
With source data, approved mapping, and a known business object, we assess technical transfer, target relevance, and required historical access.
Support an SAP go-live with evidence your team can defend at audit while keeping validation on schedule. We take a risk-based approach from the template to the interface for greenfield or brownfield projects and existing ECC systems.
VAT identification number pursuant to § 27a German VAT Act (UStG): DE328451232
Consumer dispute resolution (VSBG)
In accordance with § 36 VSBG: we are neither willing nor obliged to participate in dispute resolution proceedings before a consumer arbitration board.
Liability for content
We are responsible for our own content on these pages under the general laws. Under Articles 4 to 8 of Regulation (EU) 2022/2065 (Digital Services Act, DSA), as a service provider we are not obliged to monitor transmitted or stored third-party information or to investigate circumstances that indicate unlawful activity.
Note: The §§ 7–10 of the previous Telemedia Act (TMG) on the liability for digital services have not been transferred to the German Digital Services Act (DDG). Liability for digital services is now primarily regulated by Regulation (EU) 2022/2065 (DSA), in particular Articles 4–8 — referenced above. The §§ 7–10 DDG cover other subjects (limited responsibility under DSA Articles 4–8 + Wi-Fi access, blocking claims under copyright law, lists of audiovisual-media-service and video-sharing-platform providers, and information-request rights of the competent authorities under state law).
Copyright
The content and works on these pages created by the site operator are subject to German copyright law. Reproduction, processing, distribution and any kind of exploitation outside the limits of copyright require the written consent of the respective author.
Privacy Policy
1. At a glance
The following information gives a simple overview of what happens to your personal data when you visit this website. Personal data is any data that can be used to identify you personally.
2. Controller
The controller responsible for data processing on this website pursuant to Art. 4 (7) GDPR is:
Daniel Herrmann Consulting Daniel Herrmann (sole proprietor) Enzweilerweg 3a · 66709 Weiskirchen · Germany Phone: +49 170 7878065 Email: info@daniel-herrmann.io
A data protection officer has not been appointed; the controller is your point of contact for all data protection matters.
3. Server logs
Our website is hosted by Kinsta Inc., 8605 Santa Monica Blvd #92581, West Hollywood, CA 90069, USA. When you visit, Kinsta processes your IP address, the time of the request, the page requested, the referring page and browser information. This helps keep the site secure and diagnose faults (Article 6(1)(f) GDPR). The site is hosted in Frankfurt, Germany. Kinsta keeps server logs for up to four days. It also analyses access log data, including IP addresses, in the US to operate and secure its services. It keeps this analytics data for up to 30 days. Kinsta’s data processing addendum includes the EU standard contractual clauses.
3a. Cookie-free page request counts
We count page requests using a small image served by this website. Each request increments a counter for the UTC day and page path. The counter stores no IP addresses, user agents, referrers, query parameters or visitor identifiers, sets no cookies and reads no browser storage. Known automated requests and prefetches are filtered using request headers without storing those headers. Counts include repeated loads and requests without statistics consent; they cannot identify individual visitors or measure their time on the site. Aggregates are removed after 90 days. Technical hosting logs are separate, as described above. The purpose is to understand the use of our public pages; the legal basis for the technical request processing is our legitimate interest under Art. 6(1)(f) GDPR in a data-minimising usage overview.
4. Contact
If you contact us via form, email or phone, we store the information you provide (name, email, telephone number, company, message content) to process the enquiry and for follow-up questions. Legal basis: Art. 6 (1) (b) GDPR (pre-contractual measures) and Art. 6 (1) (f) GDPR (legitimate interest in answering enquiries). Retention: deletion as soon as the enquiry has been finally processed, at the latest after 12 months, unless statutory retention obligations apply.
Our English project enquiry form emails your details to our team. It asks about your role, company size, the support you need and your timeframe. We do not send these enquiries to Calendly.
5. Practical guides and worksheets
For our other practical guides (e.g. Strategy Guide, Compliance-Gap Analysis, Execution Playbook), we ask for your name and email address. Your company is optional. The data is stored solely to provide the requested material and for documentation of consent. Legal basis: Art. 6 (1) (a) GDPR (consent). Retention: until your withdrawal, at most 24 months. The newsletter subscription is offered as a separate, opt-in checkbox on the lead-magnet form (no coupling — you can request the material without subscribing). No marketing emails are sent without separate consent.
For the GAMP 5 practice package, name, company, business email address and telephone number are required. We use these details to process your business enquiry, make the short telephone call you requested and personally send the documents afterwards. There is no automatic download in this process. The information under Contact applies to handling this enquiry. A newsletter subscription remains separate and optional.
The same manual enquiry process applies to the German worksheet packages on Annex 22, CSV project planning, CSA/CSV, Annex 11 and ALCOA+. Name, company, business email and telephone number are required for the requested short call and personal delivery of the worksheets. The information under Contact applies. Submitting the form does not verify your affiliation with a company or your telephone number, does not provide an automatic PDF download and does not subscribe you to a newsletter. This worksheet notice was added on 26 October 2026.
5a. Newsletter (Double-Opt-In)
If you sign up for our newsletter, we use the double-opt-in procedure: after entering your email and name you receive a confirmation email with a verification link. Only after you click the link do we activate the subscription and document your consent. Data: email, name, consent timestamp, confirmation IP. Purpose: sending our monthly newsletter with practice insights, plus documentation of the consent process (Art. 7 (1) GDPR). Legal basis: Art. 6 (1) (a) GDPR (consent), § 7 (2) Nr. 2 UWG. Retention: for as long as your subscription is active; consent logs retained for 3 years after the end of the subscription as evidence in the event of complaints. Withdrawal: every newsletter contains a one-click unsubscribe link in the footer. Alternatively a short email to info@daniel-herrmann.io is sufficient. Processor: the newsletter is sent via our hosting provider's SMTP infrastructure; we currently do not use a third-party email-marketing tool. As soon as we transition to a dedicated newsletter-tool (e.g. Brevo), we will update this section and conclude an additional data-processing agreement.
5c. Link-click tracking in our emails
To understand which content in our lead-magnet emails and newsletter issues is actually useful, we route outbound links through an internal redirect endpoint (`/t/`). Each link in each send gets an aggregate click counter — but we do NOT store an identifier of the individual recipient, NO IP address and NO user agent. The data we keep is comparable to anonymous server logs (e.g.: ‘link X in send Y was clicked 42 times in total’). It does not allow us to infer who clicked. Therefore no separate consent or cookie banner is required (recital 26 GDPR — anonymous data, no personal-data processing per Art. 4 (1) GDPR). Legal basis for the redirect itself: Art. 6 (1) (f) GDPR (legitimate interest in measuring content effectiveness for our own communications). Legal pages (Impressum, Datenschutz) and the unsubscribe link are NEVER routed through the redirect, so the click behaviour on legally relevant links is never measured.
5b. Retention overview & justifications
A consolidated view of all retention periods with the rationale behind each one — the principle: minimal storage, clear purpose, documented basis.
Data categoryRetentionJustification
Server logsUp to 4 days for server logs and up to 30 days for analytics dataSite operation, security and troubleshooting. See section 3.
Contact enquiries12 monthsB2B sales cycle in pharma typically runs 6–9 months. 12 months covers follow-ups without unnecessary stockpiling. Statutory retention (e.g. § 257 HGB) only applies once a contract is concluded.
Lead magnetsup to 24 monthsUntil withdrawal of consent; 24-month cap covers documentation of consent (Art. 7 GDPR) and re-engagement cycle. Withdrawal at any time, deletion within 7 days of request.
Newsletter subscriptionactive subscription + 3 yrs consent logEmail + name only as long as the subscription is active. Consent log (timestamp + IP) retained 3 years to cover statutory limitation period (§ 195 BGB) for complaints under § 7 UWG.
Cookies (incl. analytics)30 min – 14 monthsPer-tool detailed in 6.9. GA4 capped at 14 months (the GA4 minimum, shorter possible only via property reset); all other tools below or equal to industry standard.
Cookiebot consent12 monthsMaximum window the EDPB considers reasonable for repeat-consent requests. After 12 months a fresh banner appears.
6. Cookies, analytics & tracking
This website uses analytics and tracking tools that go beyond pure reach measurement and create usage profiles. Personal data may be processed (in particular IP address, device and browser information, behaviour data) and transferred to third countries (including the USA). Legal basis is your consent pursuant to § 25 (1) TDDDG and Art. 6 (1) (a) GDPR. The consent is granted on first visit via our cookie banner and can be withdrawn at any time with effect for the future — see section 6.10 below. Withdrawal is as simple as granting consent (Art. 7 (3) GDPR); the lawfulness of processing carried out on the basis of consent prior to withdrawal remains unaffected.
6.0 Consent management (Cookiebot)
Provider: Cybot A/S, Havnegade 39, 1058 Copenhagen, Denmark (a Usercentrics company) — EU-based. Purpose: Cookiebot is the consent management platform (CMP) we use to document your consent in line with § 25 TDDDG and Art. 7 GDPR and to block analytics / tracking tools until you opt in. Data: Cookiebot stores a ‘CookieConsent’ cookie containing your consent state (categories, timestamp, anonymous identifier) and a server-side consent log. Retention: up to 12 months from the moment consent is given; renewed on each new visit after expiry. Legal basis: the processing of consent itself rests on Art. 6 (1) (c) GDPR (legal obligation to document consent). Third-country transfer: primary processing in the EU; sub-processors may include service providers outside the EEA under EU Standard Contractual Clauses. Data processing agreement: concluded with Cybot A/S. More info:Cookiebot Privacy Policy.
6.1 Google Analytics 4
Provider: Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Ireland (parent company: Google LLC, USA). Purpose: Tracking tool that goes beyond pure reach measurement. Google uses the collected data for the operation of GA4 and partly for its own purposes (no commissioned processing in the narrow sense for these purposes). Data: pseudonymous identifiers (client ID), IP address (shortened on EU server, see below), page views, dwell time, scroll depth, click events, device and browser information, approximate location (country / region from IP). Retention: up to 14 months for event-level data, then automatic deletion. IP shortening: The IP address is shortened on an EU server before being forwarded to the USA (‘_anonymizeIp’ equivalent in GA4 is active by default). Third-country transfer: data is processed on servers in the USA. Safeguards: EU Standard Contractual Clauses and the EU-US Data Privacy Framework (Adequacy Decision of 10 July 2023). Note that the supervisory authorities point out that the legal certainty gained may only be temporary; previous adequacy regimes (Safe Harbor, Privacy Shield) were invalidated by the CJEU. Data processing agreement: concluded with Google Ireland Ltd. More info:Google Privacy Policy, Browser opt-out.
6.2 Microsoft Clarity
Provider: Microsoft Ireland Operations Ltd., One Microsoft Place, South County Business Park, Leopardstown, Dublin 18, Ireland (parent: Microsoft Corporation, USA). Purpose: Session recordings and heatmaps to improve usability. Note: session recordings are a particularly intensive form of processing — they can capture sensitive content even though input fields are masked by default. We have configured the strictest masking level (‘Strict’) for all form fields. Data: mouse movements, clicks, scroll behaviour, page views, device and browser information, shortened IP address, country. Retention: up to 12 months from the last recorded session. Third-country transfer: Microsoft is a US group; data may be processed on servers in the USA. Safeguards: EU Standard Contractual Clauses and the EU-US Data Privacy Framework. The reservations noted above for GA4 apply analogously. Data processing agreement: Microsoft Online Services DPA concluded. More info:Microsoft Privacy Statement.
6.3 Leadfeeder (Dealfront)
Provider: Dealfront Germany GmbH (Leadfeeder), Markgrafenstraße 36, 10117 Berlin, Germany — EU-based provider. Purpose: B2B identification of visiting companies based on commercially licensed IP-address databases (e.g. RIPE, ARIN, public corporate IP ranges). We use this to inform our sales outreach. The aim is identification of the company, not of an individual user. Important note from a data protection perspective: IP addresses can constitute personal data, particularly when combined with other data. We therefore treat Leadfeeder processing as relevant under GDPR. Data: IP address, page views, timestamp, dwell time, referrer. Data sources: Dealfront enriches IP data with publicly available company information and licensed B2B databases. Retention: up to 12 months on visit level; aggregated reports may be retained longer. Third-country transfer: Dealfront operates primarily on EU infrastructure; sub-processors may include US service providers under EU Standard Contractual Clauses. Data processing agreement: concluded with Dealfront Germany GmbH. More info:Dealfront Privacy Policy.
6.4 Google Ads
Provider: Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Ireland (parent: Google LLC, USA). Purpose: We use Google Ads conversion tracking and (where activated) remarketing to measure the success of advertising campaigns and to address visitors with relevant ads. Data: pseudonymous click ID (gclid), conversion event, conversion timestamp, device and browser information. Cookies used include `_gcl_au` (conversion linker) and `test_cookie` (doubleclick.net technical test cookie). Retention: `_gcl_au` up to 90 days, conversion logs in the Google Ads account according to Google retention settings. Third-country transfer: data is processed on Google servers including the USA. Safeguards: EU Standard Contractual Clauses and the EU-US Data Privacy Framework. Data processing agreement: concluded with Google Ireland Ltd. More info:Google Privacy Policy, Ad personalisation settings.
6.5 LinkedIn Insight Tag
Provider: LinkedIn Ireland Unlimited Company, Wilton Plaza, Wilton Place, Dublin 2, Ireland (parent: LinkedIn Corporation, USA). Purpose: The LinkedIn Insight Tag enables campaign measurement, audience analytics and (where activated) retargeting for LinkedIn ad campaigns. Data: IP address (truncated), timestamp, page URL, device characteristics, LinkedIn member ID where the visitor has been logged in to LinkedIn. Cookies used include `bcookie`, `lidc`, `bscookie`. Retention: up to 6 months for direct identifiers; aggregated campaign reports may be retained longer. Third-country transfer: data is processed on LinkedIn servers including the USA. Safeguards: EU Standard Contractual Clauses and the EU-US Data Privacy Framework. Data processing agreement: concluded with LinkedIn Ireland Unlimited Company. More info:LinkedIn Privacy Policy, LinkedIn opt-out.
6.5a Meta Pixel (Facebook Pixel)
Provider: Meta Platforms Ireland Ltd., Merrion Road, Dublin 4, D04 X2K5, Ireland (parent: Meta Platforms, Inc., 1601 Willow Road, Menlo Park, CA 94025, USA). Purpose: The Meta Pixel (also ‘Facebook Pixel’) enables reach measurement, conversion tracking and (where activated) retargeting for advertising campaigns on Facebook and Instagram. It lets us measure the effectiveness of our ads and show relevant advertising to visitors. Data: pseudonymous identifiers, IP address, device and browser information, referrer URL, triggered events (e.g. page view). Cookies used include `_fbp` (first-party cookie used to recognise the browser) and `_fbc` (click identifier derived from the `fbclid` URL parameter). If the visitor was logged in to Facebook / Instagram at the time of the visit, Meta can attribute the visit to the respective account. Joint controllership: for the collection and transmission of the data to Meta there is joint controllership within the meaning of Art. 26 GDPR between us and Meta; we have concluded Meta’s controller addendum for this. Meta is solely responsible for any subsequent processing of the data for its own purposes. Retention: `_fbp` up to 90 days; on the event level according to the retention settings in the Meta Events Manager. Third-country transfer: data is processed on Meta servers including the USA. Safeguards: EU Standard Contractual Clauses and the EU-US Data Privacy Framework (Adequacy Decision of 10 July 2023). The reservations noted above for GA4 apply analogously. Legal basis: your consent pursuant to § 25 (1) TDDDG and Art. 6 (1) (a) GDPR. The pixel is only loaded after you have given consent via our Cookiebot banner. More info:Meta Privacy Policy, Meta ad settings.
6.6 Google Tag Manager
Provider: Google Ireland Limited (see 6.1). Purpose: Google Tag Manager (GTM) is a tag-management system that loads other tracking tags (e.g. Google Analytics, Google Ads, LinkedIn Insight Tag) on this website. GTM itself does not set any cookies and does not collect personal data per se; it only orchestrates the tags loaded after consent. Data: technical request data (IP address, timestamp, user agent) is briefly seen by Google’s GTM-loader server. No persistent identifier is set by GTM itself. Third-country transfer: the GTM loader is hosted on Google infrastructure including the USA. Safeguards as in 6.1. Note: we have configured GTM so that no measurement tag fires before you have given consent via our Cookiebot banner. More info:Google Privacy Policy.
6.7 Cloudflare (CDN & bot management)
Provider: Cloudflare, Inc., 101 Townsend Street, San Francisco, CA 94107, USA, with EU representative Cloudflare Germany GmbH, Rosental 7, c/o Mindspace, 80331 Munich. Purpose: Cloudflare is used by our hosting provider as a Content Delivery Network (CDN) and security layer. The ‘__cf_bm’ cookie is set by Cloudflare’s bot-management to distinguish humans from automated traffic and to mitigate DDoS attacks and content scraping in real time. Why we consider this technically necessary: Without bot-mitigation our website would be vulnerable to credential-stuffing, scraping and DDoS attacks that compromise availability, integrity and the security of the personal data we process (e.g. lead-magnet form submissions, newsletter signups). Bot-mitigation is therefore a technical security measure within the meaning of Art. 32 GDPR (security of processing). Cloudflare itself classifies ‘__cf_bm’ as ‘strictly necessary’ (Cloudflare cookie documentation). Replacing Cloudflare bot-management would weaken the security of personal data on this site. Data: IP address, request headers, technical fingerprint of the request. No persistent identifier across sites. Retention: ‘__cf_bm’ cookie expires after at most 30 minutes of inactivity. Aggregated security logs at Cloudflare are retained briefly under Cloudflare’s standard retention. Legal basis: § 25 (2) Nr. 2 TDDDG (technically required to operate the requested service) and Art. 6 (1) (f) GDPR (overriding legitimate interest in a secure, available website). Third-country transfer: Cloudflare is a US group; data may be processed on servers in the USA. Safeguards: EU Standard Contractual Clauses and the EU-US Data Privacy Framework (Adequacy Decision of 10 July 2023). The EU General Court dismissed the challenge to the adequacy decision on 3 September 2025 (T-553/23). An appeal was filed (C-703/25 P). Data processing agreement: concluded as part of the hosting contract. More info:Cloudflare Privacy Policy.
6.8 Google Search Console
Provider: Google Ireland Limited (see 6.1). Purpose: Google Search Console (GSC) lets us monitor how the site performs in Google’s search results — indexing status, search queries that lead to the site, click-through rates, technical crawl errors. Cookies / tracking on visitors: GSC itself sets no cookies on visitors of this website and runs no client-side script. The site ownership is verified by a static HTML meta tag and / or a DNS TXT record. Data: aggregated search analytics from Google’s side (search queries, impressions, clicks); these are not directly linked to individual visitors. The data is made available to us only in aggregated form. Legal basis: Art. 6 (1) (f) GDPR — legitimate interest in monitoring the site’s search visibility. Third-country transfer: the aggregated reporting is generated on Google infrastructure including the USA. Safeguards as in 6.1. More info:Google Privacy Policy.
6.9 Cookie storage durations
Session cookies are deleted when the browser is closed. Permanent cookies have the following maximum lifetimes: Google Analytics 4 — up to 14 months (data retention shortened to 14 months in GA4 settings); Microsoft Clarity — up to 12 months; Google Ads (`_gcl_au`) — up to 90 days; Meta Pixel (`_fbp`) — up to 90 days; LinkedIn (`bcookie`) — up to 6 months; Cloudflare (`__cf_bm`) — at most 30 minutes of inactivity; Leadfeeder — typically session-based, not stored on the device; CookieConsent (Cookiebot) — up to 12 months from the moment consent is given.
6.10 Withdrawal of consent
You can withdraw your consent at any time with effect for the future — withdrawal is as easy as granting consent:
1. Open cookie settings: click the ‘Cookie settings’ link in the footer to re-open the banner and adjust your choice (this controls all of GA4, Clarity, Google Ads, LinkedIn, Meta Pixel and Leadfeeder). 2. By email: send a short message to info@daniel-herrmann.io — we will block the relevant tools for you. 3. Per tool: for Google Analytics the official browser opt-out is available; for Google Ads under Ad personalisation settings; for LinkedIn under LinkedIn opt-out; for the Meta Pixel under Meta ad settings. Microsoft Clarity and Leadfeeder are controlled exclusively via our cookie banner.
The lawfulness of processing carried out on the basis of consent prior to withdrawal remains unaffected (Art. 7 (3) GDPR).
6.11 Appointment booking with Calendly
We use Calendly LLC, 115 E Main St, Ste A1B, Buford, GA 30518, USA, for appointments on our German booking and compliance check pages. The embedded calendar loads when you explicitly allow preferences, statistics and marketing in our cookie banner. Your choice also applies when you return. You can change it at any time in Cookie settings. You can also arrange an appointment by email or follow the direct link to Calendly, where its own cookie settings apply.
When the calendar loads, Calendly and its service providers receive technical data such as your IP address and browser information. They may use cookies and other browser storage to run the calendar, protect it against abuse, analyse usage and support marketing. Your consent covers optional storage and the associated processing under section 25(1) TDDDG and Article 6(1)(a) GDPR. Under Calendly’s terms, we and Calendly each act as independent controllers for data collected through the embedded cookie technologies.
When you book, we process your name, email address, company, answers to the booking questions and chosen time. We use these details to prepare the meeting and send your Microsoft Teams invitation. The legal basis is Article 6(1)(b) GDPR for steps you request before entering into a contract, or Article 6(1)(f) GDPR for our legitimate interest in responding to a request on behalf of your company. We keep booking details for as long as needed to organise the meeting and handle follow-up correspondence. Statutory retention periods may also apply.
Calendly’s data processing addendum forms part of its customer terms. It covers the booking data Calendly processes on our behalf in the US. For EU-US transfers it provides for the EU-US Data Privacy Framework, with EU standard contractual clauses if that framework ceases to apply. See Calendly’s privacy notice for more information.
7. Web fonts
The fonts used on this website are served locally. Loading these fonts does not connect your browser to Google or any other font provider.
8. Technical and organisational measures (TOM)
To protect your data we implement appropriate technical and organisational measures pursuant to Art. 32 GDPR — among them: TLS encryption (HTTPS) for the entire site, encrypted database connections, server hosting in the EU (Kinsta / GCP Frankfurt), restricted admin access via individual accounts with strong passwords and 2FA, regular automatic backups, role-based access controls, a documented record of processing activities pursuant to Art. 30 GDPR, and data minimisation at the application level. We continuously review and update these measures.
9. Your rights
Under the GDPR you have the following rights:
Right of access (Art. 15 GDPR) — information about which of your personal data we process.
Right to rectification (Art. 16 GDPR) — correction of inaccurate data.
Right to erasure (Art. 17 GDPR) — deletion of your data where the legal conditions are met.
Right to restriction of processing (Art. 18 GDPR).
Right to data portability (Art. 20 GDPR) — receipt of your data in a structured, common, machine-readable format.
Right to object (Art. 21 GDPR) — to processing based on legitimate interest, including for direct marketing. See highlighted box below.
Right to withdraw consent (Art. 7 (3) GDPR) — at any time with effect for the future, see section 6.10.
Right to lodge a complaint (Art. 77 GDPR) — with a supervisory authority, in particular in the EU member state of your residence, your workplace or the location of the alleged infringement. Competent supervisory authority for our office location: Independent Data Protection Centre Saarland (Unabhängiges Datenschutzzentrum Saarland), Fritz-Dobisch-Straße 12, 66111 Saarbrücken.
Requests regarding these rights are to be directed to: info@daniel-herrmann.io. We will respond within the statutory period (usually one month).
10. Currency of this Privacy Policy
Last updated: 22 November 2026. We reserve the right to adapt this policy so that it always meets current legal requirements. The current version is always retrievable from this website.
Free material by email
Your material is on the way.
Enter your name and email, we send the material directly to your inbox, with a short personal note from Daniel.
Thanks, check your inbox.
We just sent the material to your email. If it doesn't arrive within a few minutes, please check your spam folder.
Once a month · CSV practice
CSV insights from real Pharma projects.
What you get next: the GAMP 5 2nd Edition impact, what the FDA CSA Final Guidance means for your validation strategy, and how the 8-week CSV sprint works. Unsubscribe anytime in one click.
Almost done.
Confirm your email via the link we just sent to your inbox. After confirmation we'll send the latest newsletter issue right away.
We use your data exclusively for the newsletter. No sharing with third parties. Privacy policy.