IT systems · Practical guide

LabVantage and ERP: validating the transfer of results

A numerical value without a sample, method, unit or version may be unusable for a quality decision. Determine which details transfer directly and which remain available through stable references. The ERP must be able to identify the intended record unambiguously.

Table of contents

At a glance

What should you test when LabVantage transfers results to an ERP?

Trace a result from the correct sample and version in the LabVantage LIMS through to the ERP record used. Check unit, status, approval prerequisites and handling of subsequent corrections. Distinguish technical receipt from business acceptance. Retries must not produce duplicate or contradictory decisions.

Scope and Applicability

LabVantage publicly states a data integration platform for device and system interfaces, as well as web services to enable system collaboration. The referenced page does not specify a particular ERP or SAP standard interface. Therefore, verify the actual integration pathway based on your interface specification. The following assessments relate to customer-specific result transmission and are independent methodological recommendations.

During a web service call, for example, verify whether a time overrun occurs before or after storage at the destination. If the transfer occurs via middleware, assess queue length, mapping status, and reprocessing. For file transfers, evaluate complete file selection, clearly defined processing states, and the handling of a re-supplied file. The actual pathway employed will depend on your architecture.

Sources: [1] [2]

The recipient must recognize the meaning and validity of the result.

Particularly important is the distinction between recorded and released results. If only released results may be used downstream, the interface must account for this state. A subsequently modified result requires a clearly defined follow-up process.

Error handling must link both systems. A message may appear as sent in the LIMS, but be rejected in the ERP due to an unknown material number. Define who identifies, corrects, and reprocesses such cases, and how the final reconciliation is performed.

Sources: [1] [2]

Distinguishing the technical interface from the technical channel

Describe the information that LabVantage should transmit to the ERP and the decision that arises therefrom. A result value may require a batch, a sample, a unit, a method, and a processing status. The technical channel carries these data; the functional interface defines their meaning and application.

Capture direction, trigger events, message types, mapping rules, and recipient rules. The manufacturer's description of integration capabilities does not confirm that your specific connection has been validated. Version, local configuration, and custom middleware determine the behavior. Also specify manual correction pathways and technical identities.

Define when a result is transferable. Preliminary, rejected, and finally assessed results may have different implications. The presence of a numerical value does not automatically constitute an approved value. The specific status rule must be clearly and consistently represented between both systems.

Sources: [1] [2]

A interface specification with significance and error path

Link each critical field to source, target, and transformation rule. Establish key relationships: which laboratory procedure belongs to which batch and which ERP object? If keys differ, a clear mapping is required. A plausible value in the wrong batch constitutes a professional error.

Describe failure scenarios already in the specification. What occurs with an unknown batch, missing unit, invalid status, or uncontactable recipient? Who identifies and resolves the issue? A simple technical queue may contain insufficient information. The handler requires the relevant business context and a clearly defined next step.

Internal Work Aid: A Interface Specification with Significance and Error Path
Data aspectQuestion to investigateExpected evidence type
Identity Correct sample, batch, and ERP reference? Comparison of key features across both systems
Result Unchanged and unit preserved or correctly transformed? Independent content review
Status Only the intended result status is used? Positive and negative status cases
Repetition Is the same message handled appropriately? Defined Retest
Error Is an unclear takeover noticed and clarified? Failure case with processing traceability documentation

Sources: [1] [2]

Worked example and tests for a correct value assigned to the wrong batch

The example does not describe a defect in LabVantage and is not a completed product test. LabVantage transmits a value of 7.25 mg/L for sample P-81 to batch C-81. During mapping, an ERP reference is incorrectly resolved and is erroneously assigned to value C-82. Technical transmission and receipt are successfully completed. A comparison based solely on the number of transmitted results fails to detect this error.

Prepare two similar batches with different known results. Perform the transfer and compare business key, value, unit, and target status. Then verify the actual usage of the result in the ERP. The own requirement must specify the correct data linkage and the authorized follow-up process.

Add an unknown target reference. This must not be unobservedly replaced by any existing dataset. An appropriate response may be rejection with clarification. Following a mapping correction, the affected scope and any prior assignments must be reviewed. A single manually repaired dataset is insufficient when a systematic error is involved.

Link the source, technical news reference, mapping status, and actual ERP end-state in the same control document. It also serves during operations: An investigation may be initiated upon a transport disruption, but it must continue until the affected result is used.

Internal Work Aid: Result Linking and Error Handling of the Interface
Test caseInput or actionExpected result
Positive correlation Transfer P-81 to C-81 Correct batch, value and unit
Similar reference Second batch with similar identification No confusion of objects
Unknown reference Use a target object that does not exist Visible clarification case
Invalid status Attempt to send preliminary result Own transfer rule applies
Repetition Resend identical business identifier No unresolved dual processing
Later correction Assessed new results to be transferred Previous and new statements remain traceable.

Sources: [1] [2]

Consider sequence, corrections, and retry actions

Results may be corrected or supplemented at a later stage. Define how a new version handles the prior transfer. A simple overwrite in the target may result in loss of necessary context. Conversely, a second active line may lead to conflicting decisions. The appropriate rule depends on the data model and process.

Check for messages arriving out of expected sequence. An older message may arrive after a more recent one. A rated rule is required that resets the current business status without being overlooked. The article does not specify a particular timestamp or versioning mechanism; it calls for a clear, self-consistent solution.

A timeout may leave it unclear whether the ERP has already processed the transaction. Before retrying, establish the required business state or put a suitable safeguard in place. Link the technical run ID to the business transaction ID so an investigator can tell whether two runs concern one transaction or several.

Sources: [1] [2]

Acceptance criteria and evidence to be established prior to execution

Name acceptable differences for critical data. A deliberately intended unit conversion is not an error but requires a valid rule and appropriate accuracy. The relevance of a truncated comment may vary depending on usage, whereas the loss of a method reference may have different implications. Justify the criteria based on actual statements.

A test protocol should link source data, message, target state, and expected usage. Isolated screenshots without a common key hinder comparison. Document the versions used, mapping status, and test environment. Differences from the production recipient must be evaluated in terms of their evidential scope.

Use targeted error data alongside normal cases. If an unknown unit or swapped reference is introduced, the intended control should respond. This also puts the validation logic itself to the test. A fully green test using exclusively ideal data provides little insight into error handling and robustness.

Sources: [1] [2]

Operate and coordinate changes among laboratory, quality assurance, and IT departments

Identify who assesses technical failures, professional data deviations, and potential impact on quality. Restoration of a connection does not imply resolution of missing results during the period in question. The system should enable the integration of open notifications and professional clarification issues.

Changes to the method, unit, status model, or ERP key may affect the interface without altering the channel. The impact assessment must take into account these technical dependencies. Maintain representative end-to-end scenarios for future regression testing. The testing scope shall be derived from the specific change.

Provide mapping, status rules, error pathway, and audit access. An internal employee should be able to track a single result process across system boundaries. This capability is equally useful for audit inquiries as for routine troubleshooting.

Sources: [1] [2]

Next steps

  • Define the message contents, authoritative system and approval boundary.
  • Align both system mapping and failure responses.
  • Normal case, correction, and repetition – end-to-end verification.
  • Alignment, monitoring, and responsibilities to be documented.
Further reading:

Project experience and collaboration

Verify that the transferred result supports its intended use

With laboratory and ERP owners, we prepare two similarly named transactions with known results. After transfer, we compare sample, batch, value, unit and status in the actual receiving transaction. Clear standard rules may allow focused negative cases. Later corrections or multi-stage middleware need further tests of order and repetition. We link the message reference to its business use. A technical receipt alone does not confirm the complete result.

Frequently asked questions about LabVantage LIMS and ERP interfaces

Must the entire raw data volume be transferred?

Not mandatory. The content required for the decision and access to necessary context must be preserved. Stable references may play a role.

Sources: [1] [2]

Is the number of transmitted messages sufficient?

No. It does not demonstrate proper assignment or professional acceptance. Add substantive controls and a reconciliation of rejected messages.

Sources: [1] [2]

Who is responsible when two suppliers are involved?

The responsible organization must have overall control over the entire process. Supplier responsibilities and documentation should explicitly include the system boundary.

Sources: [1] [2]

Is a successful API response already sufficient evidence of correct transfer?

It confirms the specified technical feedback status. Additionally, verify identity, content, status, and actual usage at the recipient site. A message may be accepted and incorrectly assigned to the wrong object. The evidence should extend to the final business state and explicitly define the boundaries of the tested channel.

Sources: [1]

How do we verify a retrospective result correction?

Define how the new site replaces or supplements the previous one and identify which previously made decisions may be affected. Jointly review amendments, sequence, redundancy, and actual usage within the ERP system. A single successful shipment alone does not validate the proper handling of prior commitments. A test limited to the first data transfer does not adequately cover this lifecycle.

Sources: [1]

Which fields should we jointly verify during a result transfer?

Consider the identity, value, unit, status, and relevant context required for your process. The precise selection depends on the intended decision. A simple numerical comparison may overlook a wrong sample or batch. Therefore, keys and relationships are just as important as the measured value.

Sources: [1]

Sources and review date

The sources provide the technical foundation. Tables, checklists, and examples are derived methodological tools, not verbatim regulatory requirements. Manufacturer information must be referenced to the specific version and configuration in use.

  1. European Commission: EU GMP Annex 11, Computerised Systems (2011)Current version as per EudraLex inventory as of 14.10.2026. Application, risks, operation, and data lifecycle; specific testing proposals are derived independently.
  2. LabVantage: Informatics TechnologyPublic Product Description: Section Integration mentions data integration platform and web services. No version-related ERP or SAP standard interface derived from it; check specific connection based on your own specification.

Sources checked: .

Daniel Herrmann, Daniel Herrmann Consulting

Daniel Herrmann Consulting

Verify data transfer to ERP final state

Considering interface specifications and a known result flow, we examine mapping, feedback, and actual data linkage within the ERP.

  • Computer system validation →

    Bring your GxP systems into validated operation, from laboratory software, MES and eQMS to ERP. We define the scope, plan risk-based tests using GAMP 5 and hand the evidence to QA for release.

Send a project enquiry Customer testimonials →